Operating time = 453 Wh * 0.80 / your device's power consumption.
Operating time = 1008 Wh * 0.80 / your device's power consumption.
Operating time = 1536 Wh * 0.80 / your device's power consumption.

To check the charge level of the EDE UPPS, look at the charging station screen.

Yes, you can leave your device plugged in to charge. Leaving it plugged in will not damage the battery.

Yes, it is safe for indoor use. Functionally it is also suitable for indoor use, making it an ideal generator for home use, a power outage device or a power source for construction sites.

No, the batteries inside our charging station cannot be replaced.

Charge it every 3 months to keep the battery above 50% when not in use. It is recommended to charge the battery before the charge drops below 15%. Charge the EDE UPPS only in ambient temperatures of 0 - 40°C, discharge at -10 - 40°C and store at -20 - 45°C. Be sure to keep the battery on a flat floor or surface. Do not turn it upside down.

It is normal for the charger to heat up while charging, so don't worry.

The device uses an air cooling system, and the built-in fan can better dissipate heat. A little noise during use is normal.

When the output power required by the consumer exceeds the power range of the device itself, it will cause the device itself to turn on the protection, lock the controller board, let it stand for 5 minutes, and turn on the charger again to activate and restart.